PVCStripDoors.com
Brought
to you by:
Brussard
Associates, Inc.
|
 |
Call Us Today!
888-531-0101
...Visit our Online Catalog
BrussardAssociates.com
Material Handling Equipment Distributor
|
|
|
|
Offset Bracket Kit
Enables PVC Strip Doors to be mounted on inside of buildings in conjunction with conventional overhead (roll-up) doors. Bracket projects 8" and is designed to be welded or bolted into place. Brackets must be positioned so as to not not interfere with normal door |
| operations. Horizontal cross member required, but supplied by others. Replacement strips (8" x .080 x 14" long) may be attached to bracket projection for 3-sided enclosure. Field trim to desired length.
|
|
|
Horizontal Slide Kit
PVC Strip Doors may be attached to a trolley system enabling the user to slide all strip material from the doorway, thus allowing unobstructed traffic. Allow sufficient wall space for curtain storage on either side of the door as needed. Side wall mounted only.
|
|
|
|
| Strip Size and Overlap Section Guide |
PVC Strip Doors can be used for almost any application. When choosing PVC strip sizes and overlaps, consider the following points:
1 - For taller doors, the strips should be heavier and wider
2 - Smaller width strips are easier to pass through than the wider strips
3 - When air movement is a problem, choose the wider wider strip with full overlap
|
| Width/Gauge | Percent Overlap | Interior Doors | Exterior Doors |
| 4" x .060 | Partial (50%) | 4' | - |
| 4" x .060 | Full (100%) | 4' | - |
| 6" x .060 | Partial (66%) | 7' | - |
| 6" x .060 | Full (100%) | 7' | - |
| 8" x .080 | Partial (50%) | 10' | 7' |
| 8" x .080 | Full (100%) | 10' | 7' |
| 12" x .120 | Partial (66%) | 12' | 8' |
| 12" x .120 | Full (100%) | 14' | 10' |
| 16" x .160 | Partial (75%) | 16' | 12' |
| 16" x .160 | Full (100%) | 20' | 18' |
|
| Mounting Options |
The actual finished PVC Strip Door size will be determined by the mounting hardware's position in relation to the opening. Our standard unit widths are measured in increments of 6" and height in even feet. Measure your opening and order the next larger standard unit based on these increments. Mounting hardware and strip length can be easily modified at your facility for custom applications. EXAMPLE: Actual opening size measures 6'7" wide x 7'8" high; order a door 7' wide x 8' high.
The MAX™ system allows the PVC Strip Door to be mounted in either the lintel (inside frame, underheader) or side wall (header) position.
|
|
| ©2002 Brussard Associates, Inc. |
|
